On this page

latest contributor to this doc

Last Edit:

@gcharang

Blockchain

The following RPC calls interact with the komodod software, and are made available through the komodo-cli software.

coinsupply height

The coinsupply method returns the coin supply information for the indicated block height. If no height is given, the method defaults to the blockchain's current height.

To use this method for large block heights, first execute the method for a small block height, such as 1000. Then execute the method for an incrementally higher block height, such as 10000. Continue increasing the height until reaching the desired height.

NameTypeDescription
"height"(integer, optional)the desired block height

NameTypeDescription
"result"(string)whether the request was successful
"coin"(string)the ticker symbol of the coin for Smart Chains, otherwise KMD
"height"(integer)the height of this coin supply data
"supply"(float)the transparent coin supply
"zfunds"(float)the shielded coin supply (in zaddrs)
"sprout"(float)the sprout coin supply (in zcaddrs)
"total"(float)the total coin supply, i.e. sum of supply + zfunds

Command:

./komodo-cli coinsupply 80000

You can find the rpcuser, rpcpassword, and rpcport in the coin's .conf file.

Command:

curl --user $rpcuser:$rpcpassword --data-binary '{"jsonrpc": "1.0", "id":"curltest", "method": "coinsupply", "params": ["80000"] }' -H 'content-type: text/plain;' http://127.0.0.1:$rpcport/

getbestblockhash

The getbestblockhash method returns the hash of the best (tip) block in the longest block chain.

NameTypeDescription
(none)

NameTypeDescription
"hex"(string)the block hash, hex encoded

Command:

./komodo-cli getbestblockhash

You can find the rpcuser, rpcpassword, and rpcport in the coin's .conf file.

Command:

curl --user $rpcuser:$rpcpassword --data-binary '{"jsonrpc": "1.0", "id":"curltest", "method": "getbestblockhash", "params": [] }' -H 'content-type: text/plain;' http://127.0.0.1:$rpcport/

getblock hash|height ( verbose )

The getblock method returns the block's relevant state information.

The verbose input is optional. The default value is true, and it will return a json object with information about the indicated block. If verbose is false, the command returns a string that is serialized hex-encoded data for the indicated block.

NameTypeDescription
hash OR heightstring OR number, respectivelythe block hash OR the block height
verbose(boolean, optional, default=true)true returns a json object, false returns hex-encoded data

NameTypeDescription
"hash"(string)the block hash (same as provided hash)
"confirmations"(numeric)a confirmation number that is aware of the dPoW security service
"rawconfirmations"(numeric)the raw confirmations (number of blocks on top of this block); the returned value is -1 if the block is not on the main chain
"size"(numeric)the block size
"height"(numeric)the block height or index (same as provided height)
"version"(numeric)the block version
"merkleroot"(string)the merkle root
"tx" : [ "transaction_id" ,...](array of strings)
"time"(numeric)the block time in seconds since epoch (Jan 1 1970 GMT)
"nonce"(numeric)the nonce
"bits"(string)the bits
"difficulty"(numeric)the difficulty
"previousblockhash"(string)the hash of the previous block
"nextblockhash"(string)the hash of the next block

NameTypeDescription
"data"(string)a string that is serialized, hex-encoded data for the indicated block

Command:

./komodo-cli getblock "0d060c88dd55c48a0e1ae663ca400d2edba709c8484ef84a727cabfbb950c320"

Command:

./komodo-cli getblock "0d060c88dd55c48a0e1ae663ca400d2edba709c8484ef84a727cabfbb950c320" false

You can find the rpcuser, rpcpassword, and rpcport in the coin's .conf file.

Command:

curl --user $rpcuser:$rpcpassword --data-binary '{"jsonrpc": "1.0", "id":"curltest", "method": "getblock", "params": ["0d060c88dd55c48a0e1ae663ca400d2edba709c8484ef84a727cabfbb950c320"] }' -H 'content-type: text/plain;' http://127.0.0.1:$rpcport/

You can find the rpcuser, rpcpassword, and rpcport in the coin's .conf file.

Command:

curl --user $rpcuser:$rpcpassword --data-binary '{"jsonrpc": "1.0", "id":"curltest", "method": "getblock", "params": ["0d060c88dd55c48a0e1ae663ca400d2edba709c8484ef84a727cabfbb950c320", false] }' -H 'content-type: text/plain;' http://127.0.0.1:$rpcport/

Command:

./komodo-cli getblock 120

Command:

./komodo-cli getblock 120 false

You can find the rpcuser, rpcpassword, and rpcport in the coin's .conf file.

Command:

curl --user $rpcuser:$rpcpassword --data-binary '{"jsonrpc": "1.0", "id":"curltest", "method": "getblock", "params": ["120"] }' -H 'content-type: text/plain;' http://127.0.0.1:$rpcport/

You can find the rpcuser, rpcpassword, and rpcport in the coin's .conf file.

Command:

curl --user $rpcuser:$rpcpassword --data-binary '{"jsonrpc": "1.0", "id":"curltest", "method": "getblock", "params": ["120", false] }' -H 'content-type: text/plain;' http://127.0.0.1:$rpcport/

getblockchaininfo

The getblockchaininfo method returns a json object containing state information about blockchain processing.

When the chain tip is at the last block before a network upgrade activation, the consensus.chaintip value is not equal to the consensus.nextblock value.

The getblockchaininfo method now returns a new size_on_disk key, which is the size of the blockchain, on disk, in bytes.

NameTypeDescription
(none)

NameTypeDescription
"chain"(string)the current network name, as defined in BIP70 (main, test, regtest)
"blocks"(numeric)the current number of blocks processed in the server
"headers"(numeric)the current number of headers we have validated
"bestblockhash"(string)the hash of the currently best block
"difficulty"(numeric)the current difficulty
"verificationprogress"(numeric)an estimate of verification progress [0..1]
"chainwork"(string)the total amount of work in the active chain, in hexadecimal
"pruned"(bool)whether the current state is in pruning mode; if true, the blockchain will not keep all transaction and block information, to preserve disk space
"size_on_disk"(numeric)the size of the blockchain on disk, measured in bytes
"commitments"(numeric)the current number of note commitments in the commitment tree
"softforks": { ..... }(array)the status of softforks in progress
"id"(string)the name of the softfork
"version"(numeric)the block version
"enforce": { ... }(object)the progress toward enforcing the softfork rules for blocks of the new version
"status"(boolean)true if threshold reached
"found"(numeric)the number of blocks with the new version found
"required"(numeric)the number of blocks required to trigger
"window"(numeric)the maximum size of the examined window of recent blocks
"reject": { ... }(object)the progress toward rejecting pre-softfork blocks (same fields as "enforce")
"upgrades":(object)the status of network upgrades
"xxxxxxxxx_string":(string)the branch ID of the upgrade
"name"(string)the name of upgrade
"activationheight"(numeric)the block height of activation
"status"(string)the status of the upgrade
"info"(string)additional information about the upgrade
"consensus": { ..... }(object)branch IDs of the current and upcoming consensus rules
"chaintip"(string)branch ID used to validate the current chain tip
"nextblock"(string)branch ID under which the next block will be validated

Command:

./komodo-cli getblockchaininfo

You can find the rpcuser, rpcpassword, and rpcport in the coin's .conf file.

Command:

curl --user $rpcuser:$rpcpassword --data-binary '{"jsonrpc": "1.0", "id":"curltest", "method": "getblockchaininfo", "params": [] }' -H 'content-type: text/plain;' http://127.0.0.1:$rpcport/

getblockcount

The getblockcount method returns the number of blocks in the best valid block chain.

NameTypeDescription
(none)

NameTypeDescription
data(numeric)the current block count

Command:

./komodo-cli getblockcount

You can find the rpcuser, rpcpassword, and rpcport in the coin's .conf file.

Command:

curl --user $rpcuser:$rpcpassword --data-binary '{"jsonrpc": "1.0", "id":"curltest", "method": "getblockcount", "params": [] }' -H 'content-type: text/plain;' http://127.0.0.1:$rpcport/

getblockhash index

The getblockhash method returns the hash of the indicated block index, according to the best blockchain at the time provided.

NameTypeDescription
index(numeric, required)the block index

NameTypeDescription
"hash"(string)the block hash

Command:

./komodo-cli getblockhash 100

You can find the rpcuser, rpcpassword, and rpcport in the coin's .conf file.

Command:

curl --user $rpcuser:$rpcpassword --data-binary '{"jsonrpc": "1.0", "id":"curltest", "method": "getblockhash", "params": [1000] }' -H 'content-type: text/plain;' http://127.0.0.1:$rpcport/

getblockhashes high low '{"noOrphans": bool, "logicalTimes": bool}'

The getblockhashes method returns an array of hashes of blocks within the timestamp range provided.

The method requires timestampindex to be enabled.

NameTypeDescription
high(numeric, required)the newer block timestamp
low(numeric, required)the older block timestamp
options(string, required)a json object
"noOrphans"(boolean)a value of true implies that the method will only include blocks on the main chain
"logicalTimes"(boolean)a value of true implies that the method will only include logical timestamps with hashes

NameTypeDescription
"hash"(string)the block hash
"blockhash"(string)the block hash
"logicalts"(numeric)the logical timestamp

Command:

./komodo-cli getblockhashes 1531614698 1531614498

You can find the rpcuser, rpcpassword, and rpcport in the coin's .conf file.

Command:

curl --user $rpcuser:$rpcpassword --data-binary '{"jsonrpc": "1.0", "id":"curltest", "method": "getblockhashes", "params": [1531614698, 1531614498] }' -H 'content-type: text/plain;' http://127.0.0.1:$rpcport/

Command:

./komodo-cli getblockhashes 1531614698 1531614498 '{"noOrphans":false, "logicalTimes":true}'

getblockheader "hash" ( verbose )

The getblockheader method returns information about the indicated block.

The verbose input is optional. If verbose is false, the method returns a string that is serialized, hex-encoded data for the indicated blockheader. If verbose is true, the method returns a json object with information about the indicated blockheader.

NameTypeDescription
"hash"(string, required)the block hash
verbose(boolean, optional, default=true)true returns a json object, false returns hex-encoded data

NameTypeDescription
"hash"(string)the block hash (same as provided)
"confirmations"(numeric)a confirmation number that is aware of the dPoW security service
"rawconfirmations"(numeric)the raw confirmations (number of blocks on top of this block); if the block is not on the main chain, a value of -1 is returned
"height"(numeric)the block height or index
"version"(numeric)the block version
"merkleroot"(string)the merkle root
"time"(numeric)the block time in seconds since epoch (Jan 1 1970 GMT)
"nonce"(numeric)the nonce
"bits"(string)the bits
"difficulty"(numeric)the difficulty
"previousblockhash"(string)the hash of the previous block
"nextblockhash"(string)the hash of the next block

NameTypeDescription
"data"(string)a string that is serialized hex-encoded data for the indicated block

Command:

./komodo-cli getblockheader "0d060c88dd55c48a0e1ae663ca400d2edba709c8484ef84a727cabfbb950c320"

Command:

./komodo-cli getblockheader "0d060c88dd55c48a0e1ae663ca400d2edba709c8484ef84a727cabfbb950c320" false

You can find the rpcuser, rpcpassword, and rpcport in the coin's .conf file.

Command:

curl --user $rpcuser:$rpcpassword --data-binary '{"jsonrpc": "1.0", "id":"curltest", "method": "getblockheader", "params": ["0d060c88dd55c48a0e1ae663ca400d2edba709c8484ef84a727cabfbb950c320"] }' -H 'content-type: text/plain;' http://127.0.0.1:$rpcport/

getchaintips

The getchaintips method returns information about all known tips in the block tree, including the main chain and any orphaned branches.

NameTypeDescription
(none)

NameTypeDescription
"height"(numeric)the height of the chain tip
"hash"(string)the block hash of the tip
"branchlen"(numeric)0 for main chain
"status"(string)"active" for the main chain
"height"(numeric)the height of the branch tip
"hash"(string)the blockhash of the branch tip
"branchlen"(numeric)the length of the branch connecting the tip to the main chain
"status"(string)the status of the chain

StatusDescription
"invalid"this branch contains at least one invalid block
"headers-only"not all blocks for this branch are available, but the headers are valid
"valid-headers"all blocks are available for this branch, but they were never fully validated
"valid-fork"this branch is not part of the active chain, but is fully validated
"active"this is the tip of the active main chain, which is certainly valid

Command:

./komodo-cli getchaintips

You can find the rpcuser, rpcpassword, and rpcport in the coin's .conf file.

Command:

curl --user $rpcuser:$rpcpassword --data-binary '{"jsonrpc": "1.0", "id":"curltest", "method": "getchaintips", "params": [] }' -H 'content-type: text/plain;' http://127.0.0.1:$rpcport/

getchaintxstats nblocks blockhash

The method getchaintxstats returns statistics about the total number and rate of transactions in the chain.

NameTypeDescription
nblocks(numeric, optional)the number of blocks in the averaging window.
blockhash(string, optional)the hash of the block which ends the window

NameTypeDescription
"time"(numeric)the timestamp for the final block in the window in UNIX format
"txcount"(numeric)the total number of transactions in the chain up to this point
"window_final_block_hash"(string)the hash of the final block in the window
"window_block_count"(numeric)the size of the window in the number of blocks
"window_tx_count"(numeric)the number of transactions in the window; this value is only returned if window_block_count is > 0.
"window_interval"(numeric)the elapsed time in the window in seconds; this value is only returned if window_block_count is > 0.
"txrate"(numeric)the average rate of transactions per second in the window; this value is only returned if window_interval is > 0.

Command:

./komodo-cli getchaintxstats

You can find the rpcuser, rpcpassword, and rpcport in the coin's .conf file.

Command:

curl --user $rpcuser:$rpcpassword --data-binary '{"jsonrpc": "1.0", "id":"curltest", "method": "getchaintxstats", "params": [] }' -H 'content-type: text/plain;' http://127.0.0.1:$rpcport/

getdifficulty

The getdifficulty method returns the proof-of-work difficulty as a multiple of the minimum difficulty.

NameTypeDescription
(none)

NameTypeDescription
number(numeric)the proof-of-work difficulty as a multiple of the minimum difficulty

Command:

./komodo-cli getdifficulty

You can find the rpcuser, rpcpassword, and rpcport in the coin's .conf file.

Command:

curl --user $rpcuser:$rpcpassword --data-binary '{"jsonrpc": "1.0", "id":"curltest", "method": "getdifficulty", "params": [] }' -H 'content-type: text/plain;' http://127.0.0.1:$rpcport/

getlastsegidstakes depth

The getlastsegidstakes method returns an object containing the number of blocks staked by each segid in the last X number of blocks, where the value of X is equal to the indicated depth.

Note Only applies to -ac_staked Smart Chains

NameTypeDescription
depth(numeric, required)the number of blocks to scan, starting from the current height and working backwards

NameTypeDescription
"NotSet"(numeric)the number of blocks that have no SegId set
"PoW"(numeric)the number of blocks created through PoW
"PoSPerc"(numeric)the percentage of blocks created through PoS
"SegIds"(json object)the json containing the data of number of blocks in each SegId
"n"(numeric)the number of blocks staked from SegId n in the last X blocks, where X is equal to the indicated depth

Command:

./komodo-cli getlastsegidstakes 1000

You can find the rpcuser, rpcpassword, and rpcport in the coin's .conf file.

Command:

curl --user $rpcuser:$rpcpassword --data-binary '{"jsonrpc": "1.0", "id":"curltest", "method": "getlastsegidstakes", "params": [1000] }' -H 'content-type: text/plain;' http://127.0.0.1:$rpcport/

getmempoolinfo

The getmempoolinfo method returns details on the active state of the transaction memory pool.

NameTypeDescription
(none)

NameTypeDescription
"size"(numeric)the current transaction count
"bytes"(numeric)the sum of all transaction sizes
"usage"(numeric)the total memory usage for the mempool

Command:

./komodo-cli getmempoolinfo

You can find the rpcuser, rpcpassword, and rpcport in the coin's .conf file.

Command:

curl --user $rpcuser:$rpcpassword --data-binary '{"jsonrpc": "1.0", "id":"curltest", "method": "getmempoolinfo", "params": [] }' -H 'content-type: text/plain;' http://127.0.0.1:$rpcport/

getrawmempool ( verbose )

The getrawmempool method returns all transaction ids in the memory pool as a json array of transaction ids.

The verbose input is optional and is false by default. When it is true, the method instead returns a json object with various related data.

NameTypeDescription
verbose(boolean, optional, default=false)true for a json object, false for a json array of transaction ids

NameTypeDescription
"transaction_id"(string)the transaction id

NameTypeDescription
"transaction_id": { .... }(json object)
"size"(numeric)the transaction size in bytes
"fee"(numeric)the transaction fee
"time"(numeric)the local time transaction entered pool in seconds since 1 Jan 1970 GMT
"height"(numeric)the block height wherein the transaction entered the mempool
"startingpriority"(numeric)the priority when the transaction entered the mempool
"currentpriority"(numeric)the transaction priority at the current height
"depends": { ... }(array)unconfirmed transactions used as inputs for this transaction
"transaction_id"(string)the parent transaction id

Command:

./komodo-cli getrawmempool true

You can find the rpcuser, rpcpassword, and rpcport in the coin's .conf file.

Command:

curl --user $rpcuser:$rpcpassword --data-binary '{"jsonrpc": "1.0", "id":"curltest", "method": "getrawmempool", "params": [true] }' -H 'content-type: text/plain;' http://127.0.0.1:$rpcport/

getspentinfo '{"txid": "txid_string", "index"}'

The getspentinfo method returns the transaction id and index where the given output is spent.

The method requires spentindex to be enabled.

NameTypeDescription
"txid"(string)the hex string of the transaction id
"index"(number)the output's index

NameTypeDescription
"txid"(string)the transaction id
"index"(number)the spending input index

Command:

./komodo-cli getspentinfo '{"txid": "4479f2c05ba22adf2333db724f247a09effcc9edea8c079da0da05d3a0451064", "index": 0}'

You can find the rpcuser, rpcpassword, and rpcport in the coin's .conf file.

Command:

curl --user $rpcuser:$rpcpassword --data-binary '{"jsonrpc": "1.0", "id":"curltest", "method": "getspentinfo", "params": [{"txid": "4479f2c05ba22adf2333db724f247a09effcc9edea8c079da0da05d3a0451064", "index": 0}] }' -H 'content-type: text/plain;' http://127.0.0.1:$rpcport/

gettxout "txid_string" vout_number ( includemempool_bool )

The gettxout method returns details about an unspent transaction output.

NameTypeDescription
"txid"(string, required)the transaction id
vout(numeric, required)the vout value
includemempool(boolean, optional)whether to include the mempool

NameTypeDescription
"bestblock"(string)the block hash
"confirmations"(numeric)a confirmation number that is aware of the dPoW security service aware
"rawconfirmations"(numeric)the raw confirmations (number of blocks on top of this block with this transaction)
"value"(numeric)the transaction value
"scriptPubKey":(json object)
"asm"(string)scriptPubKey in assembly format
"hex"(string)scriptPubKey in hex format
"reqSigs"(numeric)the number of required signatures
"type"(string)the type, e.g. pubkeyhash
"addresses"(array of strings)an array of Komodo addresses
"address"(string)the blockchain address
"version"(numeric)the version
"coinbase"(boolean)whether this is a coinbase transaction

Command:

./komodo-cli gettxout "d7f9b34ad3e86f48fce55dbec1f2925b8dcbd15199977fd75d224254db9ae80d" 1

You can find your rpcuser, rpcpassword, and rpcport in the coin's .conf file.

Command:

curl --user $rpcuser:$rpcpassword --data-binary '{"jsonrpc": "1.0", "id":"curltest", "method": "gettxout", "params": ["d7f9b34ad3e86f48fce55dbec1f2925b8dcbd15199977fd75d224254db9ae80d", 1] }' -H 'content-type: text/plain;' http://127.0.0.1:$rpcport/

gettxoutproof '["transaction_id", ... ]' ( "blockhash_string" )

The gettxoutproof method returns a hex-encoded proof showing that the indicated transaction was included in a block.

The gettxoutproof method relies on the txindex runtime parameter. This parameter is enabled by default on all KMD-based blockchains, and should never be disabled.

NameTypeDescription
"txid"(string)a transaction hash
"blockhash"(string, optional)if specified, the method looks for the relevant transaction id in this block hash

NameTypeDescription
"data"(string)a string that is a serialized, hex-encoded data for the proof

Command:

./komodo-cli gettxoutproof '["c71f4a2ebf87bdd588e3aa168917933ee4be1661245ebf52d5708a8339cf9d7a"]' "0a28e2fb630b282138bf23bb79f597b11acff6f57c8d9c1c10fa54770035c813"

gettxoutsetinfo

The gettxoutsetinfo method returns statistics about the unspent transaction output set.

Note this call may take a long time to complete, depending on the state of your blockchain.

NameTypeDescription
(none)

NameTypeDescription
"height"(numeric)the current block height (index)
"bestblock"(string)the best block hash hex
"transactions"(numeric)the number of transactions
"txouts"(numeric)the number of output transactions
"bytes_serialized"(numeric)the serialized size
"hash_serialized"(string)the serialized hash
"total_amount"(numeric)the total amount

Command:

./komodo-cli gettxoutsetinfo

You can find the rpcuser, rpcpassword, and rpcport in the coin's .conf file.

Command:

curl --user $rpcuser:$rpcpassword --data-binary '{"jsonrpc": "1.0", "id":"curltest", "method": "gettxoutsetinfo", "params": [] }' -H 'content-type: text/plain;' http://127.0.0.1:$rpcport/

kvsearch "key_string"

The kvsearch method searches for a key stored via the kvupdate command.

This feature is only available for Smart Chains.

NameTypeDescription
key(string, required)the key for which the user desires to search the chain

NameTypeDescription
"coin"(string)the chain on which the key is stored
"currentheight"(numeric)the current height of the chain
"key"(string)the key
"keylen"(string)the length of the key
"owner"(string)a hex string representing the owner of the key
"height"(numeric)the height at which the key was stored
"expiration"(numeric)the height at which the key will expire
"flags"(numeric)1 if the key was created with a password; 0 otherwise
"value"(string)the stored value
"valuesize"(string)the amount of characters stored

Command:

./komodo-cli kvsearch examplekey

You can find your rpcuser, rpcpassword, and rpcport in the coin's .conf file.

Command:

curl --user $rpcuser:$rpcpassword --data-binary '{"jsonrpc": "1.0", "id":"curltest", "method": "kvsearch", "params": ["examplekey"] }' -H 'content-type: text/plain;' http://127.0.0.1:$rpcport/

kvupdate "key_string" "value_string" days "passphrase_string"

The kvupdate method stores a key/value pair via OP_RETURN.

This feature is available only for Smart Chains. The maximum value memory size is 8kB.

NameTypeDescription
"key"(string, required)key (should be unique)
"value"(string, required)value
"days"(numeric, required)amount of days before the key expires (1440 blocks/day); minimum 1 day
"passphrase"(string, optional)passphrase required to update this key

NameTypeDescription
"coin"(string)the chain on which the key is stored
"height"(numeric)the height at which the key was stored
"expiration"(numeric)the height at which the key will expire
"flags"(string)the amount of days the key will be stored
"key"(numeric)the stored key
"keylen"(numeric)the length of the key
"value"(numeric)the stored value
"valuesize"(string)the length of the stored value
"fee"(string)the transaction fee paid to store the key
"txid"(string)the transaction id

Command:

./komodo-cli kvupdate "examplekey" "examplevalue" 2 "examplepassphrase"

You can find your rpcuser, rpcpassword, and rpcport in the coin's .conf file.

Command:

curl --user $rpcuser:$rpcpassword --data-binary '{"jsonrpc": "1.0", "id":"curltest", "method": "kvupdate", "params": ["examplekey", "examplevalue", "2", "examplepassphrase"] }' -H 'content-type: text/plain;' http://127.0.0.1:9801

minerids height

The minerids method returns information about the notary nodes and external miners at a specific block height. The response will calculate results according to the 2000 blocks proceeding the indicated "height" block.

NameTypeDescription
heights(number)the block height for the query

NameTypeDescription
"mined":
"notaryid"(number)the id of the specific notary node
"kmdaddress"(string)the KMD address of the notary node
"pubkey"(string)the public signing key of the notary node
"blocks"(number)

Command:

./komodo-cli minerids 1000000

You can find your rpcuser, rpcpassword, and rpcport in the coin's .conf file.

Command:

curl --user $rpcuser:$rpcpassword --data-binary '{"jsonrpc": "1.0", "id":"curltest", "method": "minerids", "params": ["1000000"] }' -H 'content-type: text/plain;' http://127.0.0.1:$rpcport/

notaries height timestamp

notaries height

notaries timestamp

The notaries method returns the public key, BTC address, and KMD address for each Komodo notary node.

Either or both of the height and timestamp parameters will suffice.

NameTypeDescription
height(number)the block height desired for the query
timestamp(number)the timestamp of the block desired for the query

NameTypeDescription
"notaries": [ ... ](array)
"pubkey"(string)the public signing key of the indicated notary node, used on the KMD network to create notary-node authorized transactions
"BTCaddress"(string)the public BTC address the notary node uses on the BTC blockchain to create notarizations
"KMDaddress"(string)the public KMD address the notary node uses on the KMD blockchain to create notarizations
"numnotaries"(number)the number of notary nodes; typically this value is 64, but the value may vary on rare circumstances, such as during election seasons
"height"(number)the block height number at which the notary-node information applies
"timestamp"(number)the timestamp at which the notary-node information applies

Command:

./komodo-cli notaries 1536365515

You can find your rpcuser, rpcpassword, and rpcport in the coin's .conf file.

Command:

curl --user $rpcuser:$rpcpassword --data-binary '{"jsonrpc": "1.0", "id":"curltest", "method": "notaries", "params": ["1000000"] }' -H 'content-type: text/plain;' http://127.0.0.1:$rpcport/

verifychain ( checklevel numblocks )

The verifychain method verifies the coin daemon's blockchain database.

Depending on the state of your blockchain database and daemon, this call can take a prolonged period of time to complete.

NameTypeDescription
checklevel(numeric, optional, 0-4, default=3)indicates the thoroughness of block verification
numblocks(numeric, optional, default=288, 0=all)indicates the number of blocks to verify

NameTypeDescription
true/false(boolean)whether the verification was successful

Command:

./komodo-cli verifychain

You can find the rpcuser, rpcpassword, and rpcport in the coin's .conf file.

Command:

curl --user $rpcuser:$rpcpassword --data-binary '{"jsonrpc": "1.0", "id":"curltest", "method": "verifychain", "params": [] }' -H 'content-type: text/plain;' http://127.0.0.1:$rpcport/

verifytxoutproof "proof_string"

The verifytxoutproof method verifies that a proof points to a transaction in a block. It returns the transaction to which the proof is committed, or it will throw an RPC error if the block is not in the current best chain.

NameTypeDescription
"proof_string"(string, required)the hex-encoded proof generated by gettxoutproof

NameTypeDescription
"txid"(string)the transaction ids to which the proof commits; the array is empty if the proof is invalid

Command:

./komodo-cli verifytxoutproof "040000004cd8bd98c66020496d0b34a5f5412400146ba10d6c7ab4286f84f7008d8d390e9ca9575183f60906e293e9766997396bec59f1c0b966085de3d17f8ac3c9d5280000000000000000000000000000000000000000000000000000000000000000da05975bf50e0f202d004b81fcc388cfd411d8c7c59a548e070b5affe938ce8ce830f10b298b00002402939a9a31df1305b40d26d9748283b102c708258717248d0d63f01d2957d8e3dcf56f6e03000000022e4babc29707fbdd8da2e4277b7c8b8b09e837f409eb047c936904d75fc8e6267a9dcf39838a70d552bf5e246116bee43e93178916aae388d5bd87bf2e4a1fc7010d"

Command:

curl --user $rpcuser:$rpcpassword --data-binary '{"jsonrpc": "1.0", "id":"curltest", "method": "verifytxoutproof", "params": ["040000004cd8bd98c66020496d0b34a5f5412400146ba10d6c7ab4286f84f7008d8d390e9ca9575183f60906e293e9766997396bec59f1c0b966085de3d17f8ac3c9d5280000000000000000000000000000000000000000000000000000000000000000da05975bf50e0f202d004b81fcc388cfd411d8c7c59a548e070b5affe938ce8ce830f10b298b00002402939a9a31df1305b40d26d9748283b102c708258717248d0d63f01d2957d8e3dcf56f6e03000000022e4babc29707fbdd8da2e4277b7c8b8b09e837f409eb047c936904d75fc8e6267a9dcf39838a70d552bf5e246116bee43e93178916aae388d5bd87bf2e4a1fc7010d"] }' -H 'content-type: text/plain;' http://127.0.0.1:9801